- GENICOM LLC User Guide printer LN45, mL450
Table Of Contents
- How This Manual is Organized
- Preface
- Unpacking and Installing Your Printer
- About this Chapter
- Installation Precautions
- Unpacking the Printer
- Installing the EP Cartridge
- Adding paper to the 500-sheet universal paper cassette
- Connecting the Parallel Cable
- Connecting the Ethernet Cable
- Connecting the Power Cord
- Turning the Printer On
- Selecting a Display Language
- Installing Printer Drivers
- Printing a Configuration Summary
- Printing a Test Page
- Printing PCL and PostScript Font Lists
- Turning the Printer Off
- Printer and Options Parts and Functions
- Understanding Paper, Paper Paths, Paper Delivery and Paper Loading
- About this Chapter
- Paper
- Paper Size Requirements
- Media Sizes Supported
- Media Types supported
- Paper Orientation
- Long and Short Edge Duplex Binding in Portrait and Landscape Orientations
- Paper Paths
- Paper Delivery
- Adding paper to the 500-sheet paper cassette, Tray 1 or Tray 2
- Adding paper to the multi bypass feeder
- Adding paper to the HCF unit (2500-sheet)
- Loading envelopes into the envelope feeder
- Understanding and Navigating the Control Panel Menus
- Printer Consumables, Cleaning and Maintenance
- Troubleshooting
- About this Chapter
- Solving Printer Power-on Problems
- Solving Print Quality Problems
- Clearing Paper Jams
- Clearing Paper Jams from Area A
- Clearing Paper Jams from Area B
- Clearing Paper Jams from Area C
- Clearing Paper Jams from Area E
- Clearing Paper Jams from Area F
- Clearing Paper Jams from Area H
- Clearing Paper Jams from Tray 1
- Clearing Paper Jams from Tray 2
- Clearing Paper Jams from Trays 3, 4 and 5 in the HCF unit
- Clearing Paper Jams from the Multi-Bypass Feeder (MBF)
- Clearing Paper Jams from the Envelope Feeder
- Control Panel LCD Messages
- Ethernet Network Interface Troubleshooting
- Using DRAM DIMMs, FLASH DIMMs and Power-on Files
- General Information
- Safety Notes and Regulatory Compliances
- Printing Font Summaries
- Frequently Used Ethernet Commands
- GENICOM Customer Support and Part Numbers
Aug 01 Genicom Publication No. GEG-99126
GENICOM LN45 and Intelliprint mL450 User Guide 6-29
Alphanumeric Code Class
Alphanumeric!Code!Class
LCD MESSAGE
(LINE 1)
LCD MESSAGE
(LINE 2)
CAUSE OF
ERROR MESSAGE
REQUIRED
ACTION
DRUM EOL NEARBY N/A (WARNING
ONLY)
P/R Drum end of life
nearby
Ensure that you have a
new P/R Drum to
install soon
F/D TRAY FULL REMOVE PAPER Face Down Tray Paper
Full
Empty output paper
from Face Down
Finishing Tray
FINISHER OVER
LAP
REMOVE PAPER Finisher Paper Overlap Empty output paper
from Finisher
PAPER OUT-TRAY 1 LOAD LETTER OR
LOAD LEGAL OR
LOAD A4 OR ETC.
No Paper in Tray 1 Add indicated paper
size to Tray 1
PAPER OUT-TRAY 2 LOAD LETTER OR
LOAD LEGAL OR
LOAD A4 OR ETC.
No Paper in Tray 2 Add indicated paper
size to Tray 2
PAPER OUT-TRAY 3 LOAD LETTER OR
LOAD LEGAL OR
LOAD A4 OR ETC.
No Paper in Tray 3 Add indicated paper
size to Tray 3
PAPER OUT-TRAY 4 LOAD LETTER OR
LOAD LEGAL OR
LOAD A4 OR ETC.
No Paper in Tray 4 Add indicated paper
size to Tray 4
PAPER OUT-TRAY 5 LOAD LETTER OR
LOAD LEGAL OR
LOAD A4 OR ETC.
No Paper in Tray 5 Add indicated paper
size to Tray 5
STACKER FULL REMOVE PAPER Finisher Full Empty output paper
from Finisher
STACKER TOP FULL REMOVE PAPER Finisher Top Tray Full Empty output paper
from Finisher top tray
STAPLE CARTRIDGE INSTALL CART. Finisher Staple
Cartridge is not
installed
Install staple cartridge
in Finisher
STAPLES LOW ADD STAPLES Finisher Staple Pin Add staples to Finisher
TONER LOW N/A
(WARNING ONLY)
Toner Low Alert Ensure that you have a
new toner cartridge to
install soon
PUNCH WASTE FULL EMPTY WASTE BOX The punch waste box
is Full
Empty the waste in the
punch waste box
NO PUNCH WASTE INSTALL BOX The punch waste box
is not installed
Install the punch waste
box