- GENICOM LLC User Guide printer LN45, mL450
Table Of Contents
- How This Manual is Organized
- Preface
- Unpacking and Installing Your Printer
- About this Chapter
- Installation Precautions
- Unpacking the Printer
- Installing the EP Cartridge
- Adding paper to the 500-sheet universal paper cassette
- Connecting the Parallel Cable
- Connecting the Ethernet Cable
- Connecting the Power Cord
- Turning the Printer On
- Selecting a Display Language
- Installing Printer Drivers
- Printing a Configuration Summary
- Printing a Test Page
- Printing PCL and PostScript Font Lists
- Turning the Printer Off
- Printer and Options Parts and Functions
- Understanding Paper, Paper Paths, Paper Delivery and Paper Loading
- About this Chapter
- Paper
- Paper Size Requirements
- Media Sizes Supported
- Media Types supported
- Paper Orientation
- Long and Short Edge Duplex Binding in Portrait and Landscape Orientations
- Paper Paths
- Paper Delivery
- Adding paper to the 500-sheet paper cassette, Tray 1 or Tray 2
- Adding paper to the multi bypass feeder
- Adding paper to the HCF unit (2500-sheet)
- Loading envelopes into the envelope feeder
- Understanding and Navigating the Control Panel Menus
- Printer Consumables, Cleaning and Maintenance
- Troubleshooting
- About this Chapter
- Solving Printer Power-on Problems
- Solving Print Quality Problems
- Clearing Paper Jams
- Clearing Paper Jams from Area A
- Clearing Paper Jams from Area B
- Clearing Paper Jams from Area C
- Clearing Paper Jams from Area E
- Clearing Paper Jams from Area F
- Clearing Paper Jams from Area H
- Clearing Paper Jams from Tray 1
- Clearing Paper Jams from Tray 2
- Clearing Paper Jams from Trays 3, 4 and 5 in the HCF unit
- Clearing Paper Jams from the Multi-Bypass Feeder (MBF)
- Clearing Paper Jams from the Envelope Feeder
- Control Panel LCD Messages
- Ethernet Network Interface Troubleshooting
- Using DRAM DIMMs, FLASH DIMMs and Power-on Files
- General Information
- Safety Notes and Regulatory Compliances
- Printing Font Summaries
- Frequently Used Ethernet Commands
- GENICOM Customer Support and Part Numbers
Aug 01 Genicom Publication No. GEG-99126
GENICOM LN45 and Intelliprint mL450 User Guide 3
Base Configuration (for table-top use)
Standard Configurations
The LN45 or Intelliprint mL450 printer can be ordered in the following two standard configurations:
Base Configuration (for table-top use)
Memory: 64 Mbytes RAM Memory
Resolutions: 300 x 300 dpi and 600 x 600 dpi
Paper Input: Two 500-sheet universal paper trays and one 50-sheet Multi-Purpose Bypass Feeder for
paper, transparencies, envelopes, and other non-standard paper sizes
Paper Output: One 500-sheet face down tray
Interfaces: Bidirectional 1284 Parallel Port (Type-B); Ethernet 10/100BaseT Port
Printer Languages: Adobe PostScript 3 and PCL6
Duplexer Connector
Finisher/Stapler Connector
High Capacity Feeder Connector
AC Power
Input Connector
Finisher/Stapler
Power Connector
Parallel Port
(integral)
Optional Network
Interface Ports
(RJ45, BNC,
RS-232C/422
Serial, etc.)
Output Tray
Full Sensor
Ethernet 10Base-T Port
(integral)