- GENICOM LLC User Guide printer LN45, mL450
Table Of Contents
- How This Manual is Organized
- Preface
- Unpacking and Installing Your Printer
- About this Chapter
- Installation Precautions
- Unpacking the Printer
- Installing the EP Cartridge
- Adding paper to the 500-sheet universal paper cassette
- Connecting the Parallel Cable
- Connecting the Ethernet Cable
- Connecting the Power Cord
- Turning the Printer On
- Selecting a Display Language
- Installing Printer Drivers
- Printing a Configuration Summary
- Printing a Test Page
- Printing PCL and PostScript Font Lists
- Turning the Printer Off
- Printer and Options Parts and Functions
- Understanding Paper, Paper Paths, Paper Delivery and Paper Loading
- About this Chapter
- Paper
- Paper Size Requirements
- Media Sizes Supported
- Media Types supported
- Paper Orientation
- Long and Short Edge Duplex Binding in Portrait and Landscape Orientations
- Paper Paths
- Paper Delivery
- Adding paper to the 500-sheet paper cassette, Tray 1 or Tray 2
- Adding paper to the multi bypass feeder
- Adding paper to the HCF unit (2500-sheet)
- Loading envelopes into the envelope feeder
- Understanding and Navigating the Control Panel Menus
- Printer Consumables, Cleaning and Maintenance
- Troubleshooting
- About this Chapter
- Solving Printer Power-on Problems
- Solving Print Quality Problems
- Clearing Paper Jams
- Clearing Paper Jams from Area A
- Clearing Paper Jams from Area B
- Clearing Paper Jams from Area C
- Clearing Paper Jams from Area E
- Clearing Paper Jams from Area F
- Clearing Paper Jams from Area H
- Clearing Paper Jams from Tray 1
- Clearing Paper Jams from Tray 2
- Clearing Paper Jams from Trays 3, 4 and 5 in the HCF unit
- Clearing Paper Jams from the Multi-Bypass Feeder (MBF)
- Clearing Paper Jams from the Envelope Feeder
- Control Panel LCD Messages
- Ethernet Network Interface Troubleshooting
- Using DRAM DIMMs, FLASH DIMMs and Power-on Files
- General Information
- Safety Notes and Regulatory Compliances
- Printing Font Summaries
- Frequently Used Ethernet Commands
- GENICOM Customer Support and Part Numbers
Publication No. GEG-99126 Genicom Aug 01
2 GENICOM LN45 and Intelliprint mL450 User Guide
Features
Welcome
Thank you for selecting the GENICOM LN45 or Intelliprint mL450 laser printer. In this manual you will
find important information regarding operation and care of your printer. Please read this manual in its
entirety and keep it at hand for later reference.
Features
Your laser printer comes with the following features.
High-speed and high-quality printing
Both the LN45 and the Intelliprint mL450 have paper output of 45 pages per minute with a resolution
of up to 600 x 600 dpi, assuring razor-sharp output of graphics and text, even at very small point sizes.
Two integral interfaces
Base configurations of both the LN45 and the Intelliprint mL450 have two integral interfaces: a bidi-
rectional parallel port and an Ethernet 10/100BaseT port.
Flexible Paper Source and Delivery
The printer comes standard with two 500-sheet universal paper cassettes and the Multi- Bypass Feeder.
An optional 2500-sheet High Capacity Feeder (HCF), Envelope Feeder, and Duplexer can be installed.
The printer also features the following paper output options—Face Down Output Tray, Face-Up Tray,
and Finisher/Stapler.
Ergonomic operation
The easy-to-read display clearly shows the operation status of the printer. Ergonomically shaped
front-panel push-buttons are used to control all functions.
User-friendly EP cartridge
The integrated EP cartridge contains both the toner and the photosensitive drum in a single housing,
which makes it easy to replace the cartridge.
Continuous printing of up to 3550 sheets
The two standard paper cassettes hold about 500 sheets of paper each and the multi bypass feeder
holds 50 sheets. Trays 3, 4, and 5 in the optional HCF unit provide a total of 2500 sheets. Together
they allow continuous printing of up to 3550 sheets.