User's Guide

When the dust bag is full, the red indicator on self-emptying dustbin charging pile flashes slowly. Please replace the dust bag in time.

When the red indicator is twinkling after the dust bag is replaced,

it is recommended to pull out the power plug and reverse the

self-emptying dustbin charging pile to check whether there are

foreign matters blocking the dust tunnel. If the dust tunnel is

blocked, refer to the figure below and remove the transparent

cover of the dust tunnel with a screwdriver to remove foreign

matters.

Note: Violent disassembly is prohibited. After cleaning, install the

cover as it is.

Care and Maintenance

Replacing Bags

Cleaning Dust Tunnel

Open the cover Pull up the dust

bag through its

handle

Throw away the

old one

Replace it with

a new one

Make sure that

the dust bag is

installed in place

Illustration of

correction

installation

Close the flip

cover

Transparent cover of dust tunnel

Dust tunnel