User's Guide

On/Off/Pause

• Press and hold the button for 3 seconds to turn on the

machine; The ring light changes gradually, and the machine

gives a voice prompt for powering on; Short press the

button to clean all; or press and hold the button for 3

seconds to start the spot cleaning.

• When the robot is still, press the button for 3 seconds

to turn off the machine. The ring light changes gradually

and the machine gives a voice prompt for powering off.

• In the process of cleaning, short press the button , then

the robot will pause.

• If the robot is still and has not operated for more than 20

minutes, it will enter the hibernate state.

Note: During charging, the robot cannot be turned off.

Get Started

9. Cleaning

Add Water to the Water Tank or Clean the Mop

Cloth Mid Way

• Short press this button , the robot will pause, remove

the mopping module, after adding water or cleaning the

mop, reinstall the mopping module, short press this button

again to continue cleaning.

Set the Cleaning Mode

• The machine is the standard mode by default; After it

is connected with App, you can select more modes in

the App.

Failure State

• When the robot is abnormal. it will give a voice

prompt and the ring light will blink in red. Please refer

to "Trouble-shooting" for solutions.

• When there is no operation for 10 minutes under the

failure state, the robot will hibernate automatically.

Automatic Recharge/Manual Recharge

• When the battery is low during cleaning, or when the

cleaning is finished, the robot will automatically recharge.

• During cleaning, short press the button , then the

robot will return to the self-emptying dustbin to recharge.