User's Manual

1) com port set up

This is for hardware setting of port set up only. There are port 1

to port 4.

1) PROGRAM READ AND WRITE

Read the data from set or write the one.

2) SCAN OPTION SET UP

3-1) SCAN SPEED : 50 ~ 500msec range. Primary stage is 50msec.

3-2) ATTACK TIME : 0 ~ 4 sec range. Primary stage is 0sec.

3-3) RESUME TIME : 1 ~ 10 sec range. Primary stage is 4sec.

3-4) HOME CHANNEL : 1 ~ 32CHANNEL range.

Primary stage is 1 CHANNEL.

3) DISPLAY SET UP

Can be select set display. CHANNEL, NAME AND FREQUENCY are

possible.

4) MODE OPTION

You can change and select what you want.

5) SCAN MODE

You can change and select what you want.

7) T-O-T SETUP

You can change and select what you want. If you need.

Primary stage is DISABLE.

ENABLE : 10 ~ 990sec range, STEP is 10 sec.

PENALTY ENABLE : 1 ~ 60sec range, STEP is 1 sec.

6. Setting up for Tool OPTION

1) NEW CREATE : Can be change the original setting or you can make a

your own setting.

2) OPEN FILE : Can be see the old data or can find you one.

3) SAVE : Save the new Data

6 7