User's Manual

ROGERS LABS, INC. Genex Electronics
4405 W. 259th Terrace MODEL: FRS 300
Louisburg, KS 66053 Test #: 010419
Phone/Fax: [phone] Test to: FCC Parts 2 and 95 Page 3 of 2
FRS300Manual.doc 05/18/2001
3) Setting the Tone Code(CTCSS)
MK 1995 has 38 CTCSS Codes
_ To set the Tone Codes(CTCSS)
- Press Function[F] button once more,[XX oF up to 38] will appear and tone code digit will blink
on the LCD. " oF " means no CTCSS code.
- Press up[ ↑ ] or down[ ↓ ] button to choose the desired sub-channel to use.
- Press the PTT button or Function[F] button to confirm.
4) Setting the Transmit Power HI/LO
- HI : 1.8W TX power
- LO : 500mW TX power
_ To set the TX output power
- Press the Function [F] button until the [ Po LO or HI ] appears.
- Press the up [ ↑ ] button or down [ ↓ ] button to set the TX power
- Press the PTT button or Function [F] button to confirm.
- HI or LO will appear on the LCD.
- If the battery is in low condition, the TX Power will be switched to LO automatically. Even though the
TX power is set to HI.
5) Setting the DW(dual watch) and CTCSS in DW mode.
_ To active the DW mode
- Press the Function [F] button until the [ oF or 1 up to 15] and DW icon blink on the LCD.
- Press the up[ ↑ ] button or down [ ↓ ] button to choose the channel.
- " oF " means no DW mode.
- Press the PTT button or Function [F] button to confirm.
- DW icon will appear on the LCD.
_ To stop the dual watch (DW)
- Press the "S" Scan button, the unit will stop the dual watch and will return to normal operation and DW
icon will disappear from the LCD.
- DW icon will disappear from the LCD.
6) VOX (Voice Operated Transmission)
This option enables you to have hands-free conversation. You do not have to operate the PTT button each
time when you want to transmit.
You can also choose the VOX sensitivity to suit your environment of operation.
(Ex ; noisy road, motor bike, factory etc.)
_ To set the VOX mode.
- Press the Function [F] button until the [ Uo oF or x ] appears. x is a vox level
- VOX icon will be appeared on the LCD.
_ To set the VOX level
- Press the up[ ↑ ] button or down [ ↓ ] button to set the VOX level from 1 to 5.
"oF" is disable the VOX function.
" 3 " is most sensitive.
" 1 " is least sensitive.
- Press the PTT button or Function [F] button to confirm.
7) Beep tone
_ To activate or disable the beep tone
- Press the Function [F] button until [bP on or oF] and the BELL[ ] icon blink on the LCD.
- Press the up[ ↑ ] button or down [ ↓ ] button.
- Press the PTT button or Function [F] button to confirm.
8) Roger tone
This feature will give the tone signal to other parties when transmitting finished (when PTT button is
released.)