Programming Manual

• Freq Margin : It is set margin of Tone 1 Frequency from 0.5% to 10%.
(basic value : 1.5%)
• Tone 1 Duration : It is mean time of Tone 1 and it can be set from 100msec
to 10000msec. It can be set unit of 10msec.
• Gap Time : It is set time from Tone 1 to Tone 2.
It can be set 0 or from 200msec to 10000msec.
• Tone 2 Disable : It can be On/Off set of Tone 2.
• Tone 2 Freq. (Hz) : It is Tone 2 Frequency and it can be set from 300Hz to 3KHz.
• Freq Margin : It can be set margin of Tone 2 Frequency from 0.5% to 10%.
(basic value: 1.5%)
• Tone 2 Duration : It is the generation time of Tone 2 and it can be set from
100msec to 10000msec. And it can be set unit of 10msec.
3) Individual Group Tone
• Tone 1 Freq. (Hz) : It is Tone 1 Frequency and it can be set from 300Hz to 3KHz.
• Freq Margin : It is set margin of Tone 1 Frequency from 0.5% to 10%.
(basic value : 1.5%)
• Tone 1 Duration : It is mean time of Tone 1 and it can be set from 100msec to 10000msec. It can be set
unit of 10msec.
• Gap Time : It is set time from Tone 1 to Tone 2.
It can be set 0 or from 200msec to 10000msec.
• Tone 2 Disable : It can be On/Off set of Tone 2.
• Tone 2 Freq. (Hz) : It is Tone 2 Frequency and it can be set from 300Hz to 3KHz.
• Freq Margin : It can be set margin of Tone 2 Frequency from 0.5% to 10%.
(basic value: 1.5%)
• Tone 2 Duration : It is the generation time of Tone 2 and it can be set from
100msec to 10000msec. And it can be set unit of 10msec.