Programming Manual

3) 2Tone : Selecting Two Tone
• W
hen you double click or press enter key, it comes two tone window.
• It is indicated on Cell, when you check tone which you choose, it shows selected
tone.
• It can be closed to click
button.
4) BCL : It is the option for inhibit transmit when occupied channel is busy.
• It can be select to double click or press enter key. The state of On is indicated
yellow color.
5) BCLO : It is
• It can be On in BCL On.
• Correct call staus : staus that possible to listen signal after opening audio port which matching actual
signal and RX data which set each channel. There are CTCSS, DCS, IDCS, and two tone in RX data.
6) P-SC : Priority Scan function On/Off.
7) SC : Scan function On/Off.
8) Tx Freq : Insert transmit frequency. It is same of method of receive frequency.
9) T-Tone : It can be set transmission tone. .
10) PW : It can be set power of transmitter. (H : high power , L : low power)