User's Manual

When TX inhibit is used in conjunction with the time our timer,
Radio will not be able to transmit for the programmed period of
time after a time out occurs.
4) TOT Penalty option.
When a TOT occurs, TX will be inhibited for the penalty time.
5) BCL(Busy Channel Lock) option.
This function will inhibit TX on the operating channel while a
signal is being received.
6) BCLO(Busy Channel Lock out) option.
Even if a call is being received, this function allows TX. It also
can allow TX with correct tone.
7) TX Delay Option
This function is used to remove squelch tail caused by using
CTCSS tone.
5. Power Save
1) TX Power save on
The time of TX power save on can be set by programmer, while
radio is in Power save on condition, TX/RX is not allowed. To
be out of this mode, just press any key.
2) Power Save Off.
The time of “power save off” can be set by programmer.
In this condition, allows only RX.
3) Power save delay.
Power save mode can be cancelled whenever occurs key/TX
event.
This function forces radio not to go back to Power save mode
during Power save delay time that is programmable.
4)Power Save Sequence
Power Save Delay ==? Power Save On ===?
Power Save Off ====? Power save off ….
6. Low Battery Detection
1) RX Low battery