User's Manual

GMRS-1904BLT Basic Operation 03-03-28
5 of 9
8) Roger tone
This feature will give the tone signal to other parties when transmitting finished (when PTT
button is released.)
? To activate or disable the Roger tone
- Press the Function[F] button until [rb on or oF] and the Roger [ ] icon blink on the LCD.
- Press the up[?] button or down [?] button.
- Press the PTT button or Function[F] button to confirm.
9) Setting the Ringer
This feature provides 3 user selectable call ringer signal and vibration.
? To set your favorite call ringer signal.
- Press the Function[F] button until the [ CA 1 or up to 3 ] appears on the LCD.
- Press the up[?] button or down [?] button to select the call melody type.
- Press the PTT button to confirm.
- To activate the call , click the "PTT" button twice quickly.
10) Setting the Vibration Functions
? To set for Vibration
- Press the Function[M] button until the [ Ub on or oF ] and Vibrator[ ] icon blink on the LCD
- Press the up[?] button or down [?] button.
- Press the PTT button or Function[F] button to confirm.
11) Transmitting
- Press and hold the PTT button (The "TX" LED will light with red color)
- Speak slowly and clearly
- To stop the transmission, release the PTT button
- If there are no more receiving signal for 5 seconds, the unit will go into power save Function
12) Receiving
The coding feature reduces the possibility of interference and provides enhanced communication.
You can only listen to a call that has correct matching code.
? Important ;
Before transmitting or receiving to the other parties ;