User's Manual

 Talk on/off button
This button is used to place and receive a call
 Number buttons (Keypads)
 power on/off switch
User can turn on or off the power of Headset using power switch.
 Volume high/low switch
User can choose high or low level of volume
 Headset LED
It will flash when headset is active and battery is low.
 Necklace Hook
It was designed to connect with necklace.
 Base set LED
Green light when receiving a call and red light when placing headset into base-set
 Page button
It helps to find the headset when it is away from the base-set
 Tone/Pulse Switch
Set the dialing method to tone or pulse dialing
 Adapter jack
Connect the base-set to wall adapter
 Tell line
Connect the base to the telephone line
HEADSET OPERATION
To Place a Call (TALK Mode)
1. Press the TALK button on the Headset. The IN-USE indicator will light up when it finds a clear channel.
2. Listen for a dial tone.
3.
Once you hear the dial tone, enter the telephone number using the keypad on the Headset.
To Receive a Call
When the Headset is on the Base-set:
Since the CT-D430 features "Auto -Answer", simply pick up the Headset from the Base-set cradle when the phone
Rings and start the conversation with the caller.
When the Headset is out of the Base-set:
Press the TALK button on the Headset and start the conversation with the caller.
To End a Call (Standby Mode)
Press the talk button on the headset or return the headset into base-set.
Once the headset is returned to the base-set, headset will automatically resume to standby mode.
2 - 24 Million Combination Digital Security Coding
The GCT-430 uses a digital coding security system to prevent unauthorized use of your telephone line by other nearby
cordless phones. The GCT-430 has 2 - 24 million possible security code combinations, which is randomly generated
every eight times the TALK button is pressed or Headset is picked up from the Base-set.