User's Manual

SPREAD SPECTRUM TECHNOLOGY ADVANTAGES
Smart Channel Hopping - During operation, the CT-D430 constantly monitors the transmission for interference. If
interference is detected, the phone automatically scans for and hops to the next clear channel. This hopping is instant
and does not interrupt normal conversation.
Maximum Security - The security code is changed every, selected from one of 2 - 24million different codes making
interception virtually impossible.
INSTALLATION
BASE-SET CONNECTION
1. Plug the telephone line cord into the telephone line jack at the back of the Base-set.
2. Connect the other end of the line cord into a modular telephone outlet located on your wall
POWER CONNECTION
CAUTION: You must use a Class II, AC 120 Volt /DC9 Volt adaptor that delivers at least 300 mA.
1. Plug the AC adapter into a standard AC outlet.
2. Insert the adapter plug into the DC 9V jack on the back of the Base-set.
CHARGING THE BATTERY (FULL CHARGE)
Once the Base-set has power connection, place the Headset in its cradle on the Base-set.
NOTE: THE Li-Polymer battery is continuously charged until the battery is full charged when the Headset is on the
cradle of the Base-set.
PREPARING FOR INITIAL USE
1. Check phone line and power connections.
2. Push the Headset TALK button to confirm that you have a dial tone. If you do not get a dial tone, please refer
to the Troubleshooting chart.