User's Manual

- 12 / 16 -
This material may not in whole or part be copied, stored electronically or communicated
to third parties without GENEX Telecom’ s prior agreement in writing.
3.5 Changing a device
3.5.1 Changing to Mobile phone during talking over the Headset
1) Talk over the Headset.
2) To talk over the mobile phone, separate the Audiogate from the mobile phone.
3) Talk over the mobile phone.
3.5.2 Changing to Headset during talking over the Mobile phone.
1) Talk over the mobile phone.
2) To talk over the Headset, insert the Audiogate into the Ear Jack port of the mobile phone.
3) Turn on the Headset and Audiogate.
4) Press the “connection” button of the Headset and audiogate (see section. 3-1),
it is possible to talk over the Headset.
3.6 Turn off Headset and Audiogate
1) Slice down the button of Audiogate to turn off.
2) To turn off the headset press down and hold down the Volume Up/Down button (power button) for 3 seconds
until it sounds “Ding Dong” .
3.7. Using headset with another bluetooth device
3.7.1 Using headset with Mobile phone having bluetooth chip.(Without separate
Audiogate)
1) Press Volume Up/Down button (Power button) for 3 seconds and it sounds “Ding
Dong Dang” and then “beep” .
2) “Beep” sound means the mobile phone discover the headset.
3) Green LED and Red LED is blinking by turns.
4) Check the mobile phone display and follow any instruction.