Manualshelf

Full Product Manual

ManualsBrandsGenex Solutions ManualsGenerators1800-Watt Solar Powered Portable Generator with Electric Start
11121314151617181920
14
Troubleshoong
My Nature’s Generator won’t charge when I connect my solar panel to it.
Please follow these steps.
1. Make sure the solar panel is pointed directly toward the sun. It is preferred to posion the solar
panel face the south. The solar panel may produce lile or no power if it is posioned in shade.
2. Check the cable connecon on Nature's Generator and make sure it fits ghtly.
3. If the LCD lights up, but the baery bar is not running. It means Nature's Generator is being
fully recharged by the solar panel or solar panel does not have high enough voltage to recharge
the Nature's Generator.
My AC device(s) are not powering up from my Nature’s Generator.
Please follow these steps:
1. Verify your device is suitable for use with your Nature's Generator. The Nature's Generator AC
outputs work only with 120V AC and up to 1800 was on three outlets combined.
2. Make sure the Main Switch is turned on.
3. Check the baery bar. If there are only three bars or less, recharge your Nature's Generator.
Some AC devices pull big power and it is recommended to recharge your Nature's Generator full
before heavy use.
4. Make sure the AC outlet switch is turned on. The LED light should be green.
5. If LED light is red, please check the failure icons on the LCD display.
a. Baery Fail Icon: replace your baery.
b. Baery Low Icon: recharge your baery before use.
c. Temperature Warning Icon: The internal temperature is too high. Please let it cool down before
use.
d. FUSE Icon: Replace the fuses.
e. AC! Icon: The AC inverter is being protected. Unplug your AC device, turn off AC outlet switch
and back on to try it again.
My Nature’s Generator baery drains fast.
Please follow these steps.
1. Check the waage of AC device(s). Some devices like hair dryer, microwave or vacuum draw
big waage and thus the baery drains fast. Please always monitor the waage output
informaon on the LCD display.
2. When AC device is not in use, turn off AC outlets of your Nature's Generator to conserve power.
The AC outlets consume a considerable amount of power for being ready to use.
3. When Nature's Generator is not in use, turn off the Main Power Switch to shut off the
LCD display and USB ports.
Visit Naturesgenerator.com for More Information