User Manual

Radar Detector GENEVO ONE M 06
SpeedMeter Option:
This function is intended for the legalization of the detector when used in countries where radar detectors are prohibited.
The detector stops alerting to radars and lasers. Nothing but your current speed will appear on the display and all radar and
laser detection settings will disappear from the menu. When entering the menu, you will be notified of deactivated functions.
To activate the SpeedMeter, you must have the detector turned on, press and hold the
Middle button and Right button
together (on the top of the detector) for five seconds. Then the display will show SpeedMeter ON and the detection functions
of the radar and laser are completely deactivated. To reactivate your detector again, unplug it from the power source, hold
the
Right button and „+“ button and then plug it into the power source. You need to hold the buttons for approximately
8 seconds. After 8 seconds display will show (SpeedMeter OFF). Now you have a fully working detector again.