User Manual

Radar Detector GENEVO ONE M 03
Items in the menu are as follows:
(recommended settings are highlighted)
Sensitivity: Highway / City / Auto City
Setting the speed in Auto City (item is present only if the sensitivity is set to Auto City): Through
Middle button you are selecting
between speeds for editing (left number indicates the speed below which the detector will not respond to alerts. Right number
indicates the speed below which the detector will detect alerts like in City mode).
+ / - buttons on the right side of the detector
change the specific speed. When detector is set up to “20 50” speed below 20 km/h on the radar will not respond. In the velocity
range 20-50 km/h will only respond to stronger radar signals. Maximum detector sensitivity on the radar starts from 50 km/h.
Setting values City and Auto City sensitivity (entry is present only if the detector sensitivity is set to other than Highway):
Via
Middle button you can select radar band for editing. To change the signal level which will respond to radar signals use
+ / -. The level of suppression can be selected in the range 0-9. For example, when setting is K2 and Ka2 the level of detection
in all bands are slightly decreased.
Display Mode: Speed/Time, Speed/Voltage, Voltage, Time, Speed, Speed/Compass
Alert type: Voice first / Beep first / No voice - Allows you to set if you want to be alerted first via voice alert or beeping sound.
Auto Mute: On / Off: If it´s activated, after two seconds of ongoing alert the volume will be reduced.
The minimum speed for signaling radar: Off, 10 km/h, 20 km/h, 30 km/h ........... 130 km/h
K-Band: Wide / Narrow / Instant On /
Off (In countries, where police use K band radars, it is recommend to use K Narrow setting)