Use and Care Manual
English
12" Dual-Bevel Sliding Compound Miter Saw
Operator’s Manual GMSDB1215LF
6
Keep your hands out of the path of the saw blade
Keep the motor air slots clean and free of chips
Make sure all the saw’s adjustment handles are tight
Never apply lubricants
Never use saw blades
Never start the tool
Allow the motor to attain full speed
Always keep the blade guards in place
Never reach around
Never lock the switch
Never attempt to recut small pieces.
Never cut ferrous metals or masonry.
• Donotperformfree-handcuttingoperations
• Longorwideworkpiecesshouldbeproperlysupported.
IMPORTANT: After completing the cut
Turn off the saw and allow the blade to completely stop
Turn off the saw and allow the blade to completely stop
Never perform layout,
Turn the machine “off” and disconnect the machine
Disconnect the machine
If any part of your miter saw is missing, damaged, or fails in any way,
WARNING:Read and understand all warnings, cautions and operating
instructions before using this equipment. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS










