Use and Care Manual

English
8V Lithium-ion Rotary Tool
Operator’s Manual GLRT08B-65
• Wire and bristle brushes must never be operated at speeds greater than
15,000 RPM



•
Wear protective gloves and face shield when using wire or bristle brushes.


•
When using grinding wheels or similar attachments,



•
Handle sharp bits with care and never use dull or damaged bits

•
Always use clamps or similar devices to secure the work-piece at all times




•
Always inspect the work-piece before cutting

•
Never start the tool when the bit is engaged in the work-piece.

•
Always use the proper direction of feed when carving, routing or cutting.


•
If the bit becomes jammed or bogs down in the work-piece, turn the tool
“OFF” with the switch.

•
Do not leave the tool running unattended!

•
Do not grind or sand near flammable materials.

•
Do not touch the bit or collet after use

•
Do not alter or misuse the tool.

•
This product is NOT intended for use as a dental drill in human or veterinary
medical applications.
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS FOR CHARGER &
BATTERY
• Save these instructions. 

•
Before using the battery charger, 

•
Use only the charger 

•
Do not recharge the battery in damp or wet environments. 

•
Do not operate the charger with damaged cord or plug. 
6