Use and Care Manual

English
3/8" VSR Electric Drill
Operator’s Manual GD38B
6
Guidelines for Using Extension Cords
 

 

 
SPECIFIC SAFETY RULES FOR DRILLS
 WARNING: DO NOT LET COMFORT OR FAMILIARITY WITH PRODUCT
(GAINED FROM REPEATED USE) REPLACE STRICT ADHERENCE TO
PRODUCT SAFETY RULES. If you use this tool unsafely or incorrectly, you can
suffer serious personal injury!

Hold the tool by insulated gripping surfaces when performing an
operation




Always use safety glasses or goggles.



Wear ear/hearing protectors 


Hold the tool firmly 


Always be sure you have firm footing


Do not hold the tool or place your hands near the rotating chuck or
drill bit.

Always check that the material being drilled is secure and clamped
in place


Never hold the workpiece in your hand, lap or against other parts of
the body
Recommended Minimum Wire Gauge for Extension Cords (120 Volt)
Nameplate
Amperes
(At Full Load)
Extension Cord Length
25 Feet 50 Feet 75 Feet 100 Feet 150 Feet 200 Feet
0–2.0      
2.1–3.4      
3.5–5.0      
5.1–7.0      
7.1–12.0      
12.1–16.0      
16.1–20.0      