Use and Care Manual

ManualsBrandsGenesis ManualsCircular Saws13 Amp 7-1/4 in. Circular Saw

English

ASSEMBLY AND ADJUSTMENTS

WARNING: Always be sure that the tool is switched off and unplugged before

adjusting, adding accessories, or checking a function on the tool.

WARNING: 7-1/4” is the maximum blade capacity of your saw. Never use a

blade that is too thick to allow the outer ﬂange washer to ﬁt properly on the spindle. Too

thick a blade will prevent the blade bolt from securing the blade on the spindle. Larger

diameter blades will contact the blade guards. Either situation could result in a serious

accident.

BLADE INSTALLATION ( FIG 2 )

• 

• 

• 



• 

• 



• 

• 

• 



REMOVING THE BLADE

 

 

 

 

 

 

ADJUSTING THE DEPTH OF CUT

 

 

 

 OR

 





 

NOTE: 



BEVEL ANGLE ADJUSTMENT

 

 



 

 



LINE-OF-CUT INDICATORS

 

 

 

 



FIG 2

13b