Use and Care Manual

9
English
KNOWING YOUR CUT-OFF TOOL
UNPACKING AND CONTENTS
IMPORTANT: Due to modern mass production techniques, it is unlikely the tool is
faulty or that a part is missing. If you find anything wrong, do not operate the tool until
the parts have been replaced or the fault has been rectified. Failure to do so could result
in serious personal injury.
CONTENTS IN PACKAGE
Description Q'ty Description Q'ty
ASSEMBLY AND ADJUSTMENTS
WARNING: Always be sure that the tool is switched off and unplugged before
adjusting, adding accessories, or checking a function on the tool.
INSTALLING THE GUARD (FIG 2)
WARNING: The guard must be installed and properly positioned before
installing a cutting disc or operating the tool.
• Unplug the tool.
• Pull the guard locking lever (1) outward from its locked position.
• Slide the guard mounting clamp (2) over the guard mount (4) on the tool.
FIG 1
1
8
7
5
243
6
1. ON/OFF Switch
2. Motor
3. Guard
4. Guard Locking Lever
5. Cut-Off Disc
6. Disc Locking Screw
7. Arbor Wrench
8. Hex Key
Cut-Off Tool 1
Cut-Off Disc 1
Arbor Wrench 1
Hex Key 1
Operator's Manual 1