Installation Guide
P
r
o
b
l
e
m
After the generator is turned off and utility power is present, the house loads begin to
cycle on and off.
C
a
u
se
While connected to the generator, GenerLink may have suffered an internal failure.
So
l
u
t
i
o
n
1. Reduce the load by turning off all circuit breakers in the house.
2. Reconnect and restart the generator.
3. Restore load equal to the capacity of generator.
4. Operate household loads using your generator.
5. Call for service. (Refer to the Terms and Conditions for service instructions)
6. Do not, under any conditions, attempt to remove or repair GenerLink yourself.