Installation Guide
The Connection
C
o
r
d
:
Connection cords are typically 20 to 40 feet long, with a maximum recommended
length of 65 feet for a 50-amp circuit. To determine the correct cord length, follow
these easy steps:
STEP 1: Select a location for your generator when it is being used with GenerLink.
Consult your generator manufacturers owner’s manual for instructions on the
acceptable placement of your generator.
STEP 2: Measure the length of the cord you will need by calculating the distance
from the installed GenerLink to your generator, including the vertical distance from
the electric meter to the ground.
The length of the power cord should always be as close as possible to the actual
measured distance from the electric meter in order to maximize your generator’s
power quality. Additionally, the power cord must be fully unrolled during use.
N
O
TE
:
The
GenerLok
p
owe
r
cord
is the only
p
owe
r
cord
a
pp
r
ove
d
for
use
w
i
t
h
G
e
n
e
r
L
i
nk
.
The
GenerLok
co
nn
ec
t
o
r
can only be used with
G
e
n
e
r
L
i
nk
.
It is not compatible
for
use with any
other
e
l
ec
t
r
i
c
a
pp
li
a
n
ce
/
d
ev
i
ce.