Installation Sheet

Installation Instructions for

Beckham 1 Light Table Lamp

1.0

T1T 021

Portable

T 1021T

GP I :ENERAL RODUCT NFORMATION

This product is safety listed for dry locations only.

This instruction shows a typical installation.

Adjust the height of the fixture by twisting the extension lock to loosen it and sliding the socket assembly into the desired

configuration.

Screw the lamp into the socket. Refer to the label on the lamp socket for Max Wattage information.

Install the shade by placing the shade over the lamp.

IMPORTANT SAFETY INSTRUCTIONS

This portable lamp has a polarized plug (one blade is wider

than the other) as a safety feature to reduce the risk of

electric shock.This plug will fit in a polarized outlet only

one way. If the plug does not fit fully in the outlet, reverse

the plug. If it still does not fit contact a qualified electrician.

Never use with an extension cord unless plug can be fully

inserted. Do not attempt to defeat this safety feature.

EXTENTION LOCK

SHADE

STEM

BASE

LAMP

SOCKET ASSEMBLY

PAGE 1
TT1021 Installation Instructions for TT1021 Beckham 1 Light Table Lamp Portable 1.0 IMPORTANT SAFETY INSTRUCTIONS This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock.This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit contact a qualified electrician. Never use with an extension cord unless plug can be fully inserted.
PAGE 2
SAVE THESE INSTRUCTIONS! 7400 Linder Ave, Skokie, IL 160077 800.969.3347 www.generationlighting.com © 2019 Generation Lighting.All rights reserved. The "Generation Lighting" graphic is a registered trademark of Generation Lighting. Generation Lighting reserves the right to change specifications for product improvements without notification.