Installation Guide

IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE OR
CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Carefully unpack and identify all parts before assembly.
Bulbs not included.
1. Follow enclosed “Standard Outdoor Mounting Plate
Installation Instructions" for electrical and fixture
installation onto wall outlet box.
2. Slip candle cover tube onto sockets.
3. Install light bulb (not included). See relamping label at
socket area for type and maximum allowed wattage.
4. Slide main frame up until it checks inside of top cover.
Then slide bridge through threaded pipe untill it checks
inside of main frame. Lock them into position with ball
cap nut.
Bulb
(not included)
Assembly Instructions For
Socket
Candle Tube
Main Frame
Bridge
Cap Nut
Top Cover
Fixture Plate
OL5901, OL5902, OL5904
1
3
2
4
(E) 10/07