Instructions / Assembly
TROUBLESHOOTING
1. Check blue wire from fan to make sure it is connected to hot wire from house.
2. Check for loose or disconnected wires in fan switch housing.
3. Check for loose or disconnected wires in light kit.
4. Check for faulty light bulbs.
CAUTION: Make sure main power is turned off before entering switch housing.
Install fan and light kit pull chains to
preassembled pull chains on fan. Pull
chains provided.
Feed the fan pull chain into the hole in the
pull chin guide.
This light kit includes 2700 (Warm white),
3000 (Soft white) and 4000K (Daylight)
correlated color temperatures (CCT). Get
desired CCT by operating the converted
switch.
Pull chain
4
0
0
0
K
3
0
0
0
K
2
7
0
0
K
Color temperature
converted switch
Pull chain
guide
4
10
11
10/2021
© 2021 Monte Carlo Fan Collections