Installation Guide

Installation Instructions for

William Table Lamp

1.0

LT1071

Portable

GP I :ENERAL RODUCT NFORMATION

This product is safety listed for dry locations only.

This instruction shows a typical installation.

IMPORTANT SAFETY INSTRUCTIONS

This portable lamp has a polarized plug (one blade is wider

than the other) as a safety feature to reduce the risk of

electric shock.This plug will fit in a polarized outlet only

one way. If the plug does not fit fully in the outlet, reverse

the plug. If it still does not fit contact a qualified electrician.

Never use with an extension cord unless plug can be fully

inserted. Do not attempt to defeat this safety feature.

LT1071, LT1081

7400 Linder Ave, Skokie, 160077IL

800.969.3347

www.generationlighting.com

The "Generation Lighting" graphic is a registered trademark of

Generation Lighting. Generation Lighting reserves the right to

change specifications for product improvements without notification.

SAVETHESE INSTRUCTIONS!

PAGE 1
LT1071 Installation Instructions for William Table Lamp LT1071, LT1081 1.0 IMPORTANT SAFETY INSTRUCTIONS This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock.This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit contact a qualified electrician. Never use with an extension cord unless plug can be fully inserted.
PAGE 2
Install the Fixture 1A FINIAL 3 HARP NIPPLE 2 HARP LAMP SHADE 1 SOCKET YOKE 1 Install the harp by inserting it in the yoke. 2 Screw the lamp into the socket. Refer to the label on the lamp socket for Max Wattage information. 3 Install the shade by placing the shade over the harp nipple and screwing the finial onto the nipple to secure it in place.