Installation Guide

Installation Instructions for

Robert Floor Lamp

1.0

LT1061

Portable

GP I :ENERAL RODUCT NFORMATION

This product is safety listed for dry locations only.

This instruction shows a typical installation.

IMPORTANT SAFETY INSTRUCTIONS

This portable lamp has a polarized plug (one blade is wider

than the other) as a safety feature to reduce the risk of

electric shock.This plug will fit in a polarized outlet only

one way. If the plug does not fit fully in the outlet, reverse

the plug. If it still does not fit contact a qualified electrician.

Never use with an extension cord unless plug can be fully

inserted. Do not attempt to defeat this safety feature.

Screw the column onto the socket assembly.

Insert the column's pipe through the base and loader, then secure them together using the washers and hex nut as shown. Make

sure the logo plate is facing the shade.

Screw the knob into the fixture.

Screw the lamp into the socket. Refer to the label on the lamp socket for Max Wattage information.

LT1061

LAMP

KNOB

SOCKET ASSEMBLY

COLUMN

BASE

LOADER

WASHERS

HEX NUT

PAGE 1
LT1061 Installation Instructions for Robert Floor Lamp LT1061 Portable 1.0 IMPORTANT SAFETY INSTRUCTIONS This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock.This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit contact a qualified electrician. Never use with an extension cord unless plug can be fully inserted.
PAGE 2
SAVE THESE INSTRUCTIONS! 7400 Linder Ave, Skokie, IL 160077 800.969.3347 www.generationlighting.com © 2019 Generation Lighting.All rights reserved. The "Generation Lighting" graphic is a registered trademark of Generation Lighting. Generation Lighting reserves the right to change specifications for product improvements without notification.