Installation Guide

2
Secure the mounting plate to the junction box.
Connect the fixture to a suitable ground in accordance with local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Neatly tuck the wiring into the junction box, place the fixture base onto the mounting studs, and secure it in place by screwing
the cap nuts onto the studs.
Screw the lamps into the sockets. Refer to the label on the socket for max wattage information.
Place the diffuser onto the socket assembly nipples and secure in place by screwing the ends of the u-frame onto the nipples.
1
2
3
1A
4
5
6
Install the Fixture
7
6
MOUNTING STUD
CAP NUT
7
MOUNTING PLATE
FIXTURE BASE
LAMP
U-FRAME
DIFFUSER
6
7
5 5