Installation Guide

2
Secure the mounting plate to the junction box.
Connect the fixture to a suitable ground in accordance with local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Neatly tuck the wiring into the junction box, align the fixture base holes with the holes on the mounting plate, and secure them
together using the fixture screws.
Screw the lamps into the sockets. Refer to the label on the socket for max wattage information.
Install the shade by screwing it onto the shade base. Make sure the shade is correctly installed before releasing. Repeat for
remaining shades.
1
2
3
1A
4
5
6
Install the Fixture
SHADE
JUNCTION BOX
MOUNTING PLATE
4
3
FIXTURE SCREW
5
FIXTURE BASE
5
LAMPSHADE BASE
7
7
6