Installation Sheet

1
Installation Instructions for
Jane 3 Light Flush Mount
1.0
EF1023
Ceiling
EF1023
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing NEC compliant junction
boxes.
This product is safety listed for damp locations.
Incandescent lamps may be dimmed with a standard incandescent dimmer.
LED lamps may be dimmed with a LED dimmer. Consult lamp manufacturer
for additional information.
This instruction shows a typical installation.
1
2
1A
3
CAUTION RISK OF FIRE-
This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the hazards
involved.
Use minimum 90°c supply conductors.
LAMP
Secure the mounting plate to the junction box.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
Neatly place all the wires into the junction box, place the fixture base onto the mounting plate, and secure it place using the
fixture screws.
Screw the lamps into the sockets. Refer to the label on the socket for Max Wattage Information.
4
5
6
FIXTURE BASE
MOUNTING PLATE
JUNCTION BOX
4
3
FIXTURE SCREW
6
55