Installation Sheet

Installation Instructions for

Ultra Light Ceiling

1.0

CF1091

GP I :ENERAL RODUCT NFORMATION

These fixtures are intended to be installed utilizing NEC compliant junction

boxes.

This product is safety listed for damp locations.

This instruction shows a typical installation.

CEILING

Visual Comfort & Co. reserves the right to change specifications for product improvements without notification.

7400 Linder Ave., Skokie, IL 60077

T 847.410.4400 | F 847.410.4500

www.generationlighting.com

SAVE THESE INSTRUCTIONS!

CAUTION RISK OF FIRE-

This product must be installed in accordance with the applicable

installation code by a person familiar with the construction and

operation of the product and the hazards involved.

Use minimum 90°c supply conductors.

PAGE 1
CF1091 Installation Instructions for Ultra Light Ceiling CF1091 1.0 CEILING GENERAL PRODUCT INFORMATION: These fixtures are intended to be installed utilizing NEC compliant junction boxes. This product is safety listed for damp locations. CAUTION - RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. Use minimum 90°c supply conductors.
PAGE 2
Install the Fixture 1A JUNCTION BOX 5 3 4 MOUNTING PLATE FIXTURE BASE FIXTURE SCREW 6 6 1 WASHER THUMB SCREW 1 Install the spider/backer by using the washers and thumb screws. 2 3 Secure the mounting plate to the junction box. 4 5 Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut. 6 Neatly place all the wires into the junction box, place the fixture base onto the mounting plate, and secure it in place using the washers and fixture screws.