Installation Guide

2
Secure the mounting plate to the junction box.
Connect the fixture to a suitable ground in accordance with local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Neatly tuck the wiring into the junction box, place the fixture base onto the mounting studs, and secure it in place by screwing
the cap nuts onto the studs.
Screw the lamps into the sockets. Refer to the label on the socket for max wattage information.
Place the shade, shade ring, and diffuser onto the threaded pipe, then secure them in place by screwing the finial onto the pipe.
1
2
3
1A
4
5
6
Install the Fixture
7
MOUNTING STUD
MOUNTING PLATE
4
3
JUNCTION BOX
CAP NUT
LAMP
5
7
6
SHADE
SHADE RING
DIFFUSER
FINIAL
THREADED PIPE