Manualshelf

Installation Sheet

ManualsBrandsGeneration Lighting ManualsChandeliersWesterly 12 Light 29" Wide Taper Candle Chandelier
12
1
Installation Instructions for
1.0
CC10612
C 10612, CC10712C
If necessary, screw the short end of the threaded nipple tightly onto the mounting plate and the screw collar onto the threaded
nipple.
Secure the mounting plate to the junction box.
Place the top hub onto the bottom hub and secure together with the provided screws.
Feed the cord through the stem and fixture loop and thread the stem into the top hub.
Install the candle tube by sliding it over the socket.
Screw the lamp into the socket. Refer to the label on the lamp socket for Max Wattage information.
Determine the wanted height of the fixture and remove a portion of the chain from the bottom by opening a link with pliers.
Install a quick link to bottom end of the chain, then secure the quick link onto the large ring and hook the large ring onto the fixture
loop.
Weave the cord through the chain, canopy loop, collar nut, screw collar, canopy and out of the junction box. Trim the cord leaving
enough to make electrical connections.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
Neatly place all the wires into the junction box, place the canopy onto the mounting plate, and secure it in place by screwing the
collar nut onto the screw collar and the canopy loop onto the threaded nipple.
1
2
1A
3
4
Westerly Chandelier
Chandelier
CAUTION RISK OF FIRE-
This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the hazards
involved.
Use minimum 90°c supply conductors.
5
6
7
8
9
10
11
12
13
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing NEC compliant junction
boxes.
This product is safety listed for damp locations.
Incandescent lamps may be dimmed with a standard incandescent dimmer.
LED lamps may be dimmed with a LED dimmer. Consult lamp manufacturer
for additional information.
COLLAR NUT
CHAIN
CANOPY LOOP
THREADED NIPPLE
MOUNTING PLATE
13
12
SCREW COLLAR
CANDLE TUBE
QUICK LINK
JUNCTION BOX
8
LAMP
STEM
FIXTURE LOOP
4
5
BOTTOM HUB
CANOPY
SOCKET
6
TOP HUB
LARGE RING
3

Summary of content (2 pages)