Manualshelf

Installation Sheet

ManualsBrandsGeneration Lighting ManualsAH by Alexa HamptonGeneration Lighting Feccetta 21" Wide Suspension Pendant
12
1
Installation Instructions for
If necessary, screw the short end of the threaded nipple tightly onto the mounting plate.
Fasten the screw collar into the bottom end of the threaded nipple and lock into position by tightening the hex nut.
Secure the mounting plate to the junction box.
Install the s-hooks from the small chains onto the fixture loop.
Determine the wanted height of the fixture and remove a portion of the chain from the bottom by opening a link with pliers.
Install the large quick link to bottom end of the chain, then secure the quick link onto the fixture loop.
Unscrew the collar nut from the screw collar, then install the collar nut, and the canopy onto the chain (in that order).
Install the small quick link onto the remaining end of the chain, then secure the quick link onto the screw collar
Weave the cord through the fixture loop, chain, collar nut, canopy, screw collar, threaded nipple, and out of the junction box. Trim the cord leaving enough to make
electrical connections.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
Neatly place all the wires into the junction box, place the canopy onto the mounting plate, and secure it in place by screwing the collar nut onto the screw collar.
Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.
Feccetta Pendant
1.1
AP1051-AP1061-AP1071
AP1051, AP1061, AP1071
1A
Pendant
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing NEC compliant junction
boxes.
This product is safety listed for damp locations.
Incandescent lamps may be dimmed with a standard incandescent dimmer.
LED lamps may be dimmed with a LED dimmer. Consult lamp manufacturer
for additional information.
CAUTION RISK OF FIRE-
This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the hazards
involved.
Use minimum 90°c supply conductors.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
THREADED NIPPLE
12
11
JUNCTION BOX
SMALL QUICK LINK
CANOPY
CHAIN
SCREW COLLAR
COLLAR NUT
FIXTURE
MOUNTING PLATE
LARGE QUICK LINK
FIXTURE LOOP
14
4
LAMP
SMALL CHAIN
S-HOOK
8
6
4

Summary of content (2 pages)