Installation Sheet

1A
Install the Fixture
2
Secure the mounting plate to the junction box.
Attach the end of the chain with the s-hook to the loop on the canopy, then attach the other end of the chain to the shade assembly.
Connect the fixture to a suitable ground in accordance with local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Neatly tuck the wiring into the junction box, place the canopy onto the mounting plate, and secure it in place with the canopy screws.
Screw the lamps into the sockets. Refer to the label on the socket for max wattage information.
1
2
3
4
5
6
7
MOUNTING PLATE
5
4
JUNCTION BOX
LAMP
3
S-HOOK
7
6
CHAIN
CANOPY
LOOP
2
6