Installation Guide

Secure the mounting plate to the junction box.
Install the shade by aligning the holes on the shade with the holes on both plates, then secure in place using the plate screws.
Screw the lamp into the socket. Refer to the label on the lamp socket for Max Wattage Information.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
Neatly place all the wires into the junction box, place the fixture base onto the mounting plate, and secure it in place using the set screw and
Allen wrench.
Adjust the angle of the shade by gently tilting it up and down.
Model AEW1002 Only: The fixture arms can rotate in a 142° arc to help with positioning the light.
1
2
1A
3
4
5
6
7
8
9
Install the Fixture
2
3
JUNCTION BOX
SHADE
7
MOUNTING PLATE
LAMP
1
SET SCREW
ALLEN WRENCH
2
FIXTURE BASE
SHADE PLATE
6
5
8
8
8
9
9
SOCKET PLATE
SOCKET
PLATE SCREW