Installation Guide

Secure the mounting plate to the junction box.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
Neatly place all the wires into the junction box, place the fixture base onto the mounting plate, and secure it in place using the set screw and
Allen wrench.
Insert lamp pins completely into the socket, Refer to the label on the socket for Max Wattage Information.
Place the shade over the socket and secure in place by screwing it in. Do not over-tighten. Repeat for remaining shades.
1
2
1A
3
4
5
6
7
Install the Fixture
2
JUNCTION BOX
SHADE
6
MOUNTING PLATE
LAMP
FIXTURE SCREW
FIXTURE BASE
SOCKET
4
3
SHADE BASE
5
7
5