Installation Guide

Place the plate and cup on top of the shade base, then secure them in place using the thumb screw. Repeat as necessary.
Secure the mounting plate to the junction box.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
Neatly place all the wires into the junction box, place the canopy onto the mounting plate, and secure it in place using the fixture screws.
Place the shade onto the socket and secure it in place using the collar nut. Repeat as necessary.
Screw the lamp(s) into the socket(s). Refer to the label on the lamp socket for Max Wattage Information.
1
2
1A
3
4
5
6
7
8
Install the Fixture
2
4
JUNCTION BOX
MOUNTING
PLATE
LAMP
FIXTURE SCREW
CANDLE TUBE
SHADE
SOCKET
SHADE BASE
8
PLATE
CUP
THUMB SCREW
7
1
5