Installation Sheet

1
2
Screw the stem assembly onto the base.
Install the shade by aligning the holes on the shade with the holes on both plates, then secure in place using the
plate screws.
Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.
Adjust the fixture arm by twisting the stem lock counter-clockwise to loosen, then raise or lower the stem as needed.
Tighten the lock by twisting it clockwise.
Adjust the shade by gently tilting it up or down.
1A
Assemble the Lamp
LAMP
SHADE
3
3
STEM LOCK
SOCKET
STEM ASSEMBLY
4
FIXTURE BASE
5
22
2
4
1
2
SHADE
PLATE
PLATE
SCREW
SOCKET
PLATE
25