Installation Guide

Secure the mounting plate to the junction box.
Screw the lamp into the socket. Refer to the label on the lamp socket for Max Wattage Information.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
Neatly place all the wires into the junction box, place the fixture onto the mounting studs, and secure it in place by screwing the thumb
nuts onto the mounting studs.
Align, then turn the shade clockwise until secured. Do not over tighten.
1
2
1A
3
4
5
6
7
Install the Fixture
2
5
JUNCTION BOX
4
MOUNTING PLATE
THUMB NUT
LAMP
7
SHADE
3
MOUNTING STUD
6
3
6