Installation Guide

1
2
1A
Assemble the Lamp
3
HALF BALL ASSEMBLY
LAMP
SHADE
9
SHADE BRACKET
SOCKET
2
4
5
JUNCTION BOX
2
7
HALF BALL
Screw the half ball to the stem.
Install the shade by aligning the holes on the shade with the holes on the bracket, then secure in place using the shade screws.
Feed the fixture wires through the spacer, collar nut, canopy and the half ball assembly, then secure the half ball assembly to the
fixture by screwing it in place.
Align and secure the mounting plate to the junction box, then slide the half ball assembly onto the mounting plate.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
Neatly place all the wires into the junction box, place the canopy onto the mounting plate and secure it in place by screwing the
collar nut tightly onto the mounting plate.
Install the lamps by screwing it completely into the socket. Refer to the label on the socket for Max Wattage Information.
Adjust the shade by gently tilting it up or down.
Adjust the position of the lights by adjusting the individual arms until even.
1A
SPACER
FIXTURE
CANOPY
2
3
MOUNTING PLATE
10
COLLAR NUT
6
7
8
9
10
11
11
2
1
4
6