Installation Sheet

2
Secure the mounting plate to the junction box..
Connect the fixture to a suitable ground in accordance with local electrical codes.
Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
Neatly place all the wires into the junction box or fixture base, place the fixture base onto the mounting plate, and secure it in
place with the fixture screws.
Install the shade onto the socket and secure it in place with the socket ring.
Screw the lamp in to the socket. Refer to the label on the socket for Max Wattage information.
1A
Install the Fixture
1
2
3
4
5
6
7
JUNCTION BOX
MOUNTING PLATE
FIXTURE BASE
SHADE
LAMP
SHADE RING
3
FIXTURE SCREW
7
6
6
4
3
2
SOCKET