Installation Sheet

1A
Install the Fixture
2
Secure the mounting plate to the junction box leaving enough of the mounting screw exposed to mount the fixture.
For Model 7950893S Only: Temporarily install the fixture to the mounting plate by aligning the keyed slots on the fixture base to the
mounting screws, place the fixture base onto the mounting plate, and secure it by rotating it to the narrow portion of the keyed slot. Fully
tighten the mounting screws to secure the fixture in place.
For Model 7950893S Only: Mark the anchor hole locations through the holes on the fixture base, then remove the fixture base from the
mounting plate.
For Model 7950893S Only: Drill appropriate sized holes at the marked locations and install the anchors.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
Align the keyed slots on the fixture base to the mounting screws, place the fixture base onto the mounting plate, and secure it by rotating it
to the narrow portion of the keyed slot. Fully tighten the mounting screws to secure the fixture in place.
For Model 7950893S Only: Screw the anchor screws into the anchors.
Place the diffuser into the ring, then secure the ring to the pegs on the fixture using the cap nuts.
1
2
3
4
5
6
JUNCTION BOX
7
6
FIXTURE BASE
DIFFUSER
MOUNTING SCREW
10
MOUNTING PLATE
RING
CAP NUT
PEG
1
10
7
8
9
10
ANCHOR
(MODEL 7950893S ONLY)
ANCHOR SCREW
(MODEL 7950893S ONLY)
4
9
4
9