Installation Sheet

ManualsBrandsGeneration Lighting ManualsIndoor Ceiling FixturesGeary 4 Light 25" Wide Semi-Flush Bowl Ceiling Fixture

FOR SEMI FLUSH MOUNT ONLY-:Unscrew and remove the fixture loop from the fixture, then remove the cap nut screws and washers

by unscrewing the cap nuts.

FOR SEMI FLUSH MOUNT ONLY SKIP TO STEP-: 9Install the mounting plate with the two mounting studs to the junction box.

If necessary, screw the shorter end of the threaded nipple tightly onto the mounting plate.

Temporarily unscrew and remove the collar nut from the screw collar, then screw the screw collar tightly onto the threaded nipple.

Secure the mounting plate to the junction box.

Screw the fixture loop onto the fixture. Determine the wanted height of the fixture and remove a portion of the chain by opening a

link and removing it from the bottom.

Install the canopy and collar nut onto the chain (in that order), then install the open link onto the fixture loop and secure it in place

by closing the link.

Weave the cord through the chain and canopy, then trim the cord leaving enough to make electrical connections.

Connect the fixture to a suitable ground in accordance to local electrical codes.

Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.

Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.

FOR SEMI FLUSH MOUNT ONLY-:Align, then place the fixture onto the mounting plate studs and secure it with the two cap nuts.

SKIP TO STEP 14

Neatly place all the wires into the junction box, place the canopy onto the ceiling, and secure it in place by screwing the collar nut

tightly onto the screw collar.

Screw the lamps into the sockets. Refer to the label on the socket for Max Wattage information.

Install a hex nut onto the threaded pipe, then screw the threaded pipe to the bottom of the socket assembly,

Place a steel washer, rubber washer, shade, rubber washer, and steel washer (in that order) onto the threaded pipe, then secure them

in place by screwing the hex nut onto the pipe.

Place the cup onto the threaded pipe and secure it place by screwing the finial onto the pipe.

Install the Fixture

LAMP

Semi-Flush Mounting

FIXTURE

CAP NUT

FIXTURE

LOOP

MOUNTING

PLATE

MOUNTING PLATE STUD

CAP NUT

SCREW

WASHER

CHAIN

FIXTURE LOOP

FIXTURE

JUNCTION BOX

MOUNTING PLATE

CANOPY

SCREW COLLAR

THREADED NIPPLE

COLLAR NUT

SHADE

HEX NUT

STEEL WASHER

FINIAL

RUBBER WASHER

HEX NUT

CUP

RUBBER WASHER

STEEL WASHER

THREADED PIPE