Installation Sheet
1A
Install the Fixture
2
Secure the mounting plate to the junction box.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
Neatly place all the wires into the junction box, place the fixture base onto the mounting plate, and secure it in place with cap nuts.
Access the lamp by opening the door. Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.
1
2
3
4
5
JUNCTION BOX
MOUNTING BAR
FIXTURE BASE
6
5
1
CAP NUT
6
LAMP
4
3
5
DOOR