Installation Sheet

ManualsBrandsGeneration Lighting ManualsLightingYorktown 10" Wide Outdoor Pendant

FOR YOUR SAFETY

ASSEMBLY

GENERAL

ARNING: BE SURE THE ELECTRICITY TO THE WIRES YOU

ARE WORKING ON IS SHUT OFF. EITHER THE FUSE REMOVED

OR THE CIRCUIT BREAKER OFF .

ou don’t need special tools to install this fixture. Be sure to follow the

steps in the order given. Read instructions carefully.

If you are unclear

as to how to proceed, consult a qualified electrician.

Carefully remove the fixture from the carton and check that all

parts are included, as shown in Figure 1 & 2. Be careful not to

misplace any of the screws or parts which are needed to install

this fixture.

*OUTLET BOX

SCREWS

*WIRE CONNECTORS

SCREW COLLAR (E)

RETAINING

SCREWS

(Q)

FIXTURE

BODY

(P)

CANOPY (H)

MOUNTING BAR (A)

*GROUND WIRE

GROUND WIRE (F)

SCREW COLLAR

RING (G)

FIGURE 1

*NOT SUPPLIED

GREEN

GROUNDING

SCREW (D)

NIPPLE (C)

*OUTLET BOX

SCREWS

MOUNTING

BAR (A)

WIRE

ONNECTORS

*GROUND WIRE

*OUTLET BOX

GROUNDING AND MOUNTING BAR LOCK UP

FIGURE 2

*NOT INCLUDED

NUT (B)

CHAIN (S)

LOOP (I)

CAGE (F)

BOTTOM ASSEMBLY (R)

WARNING: TO REDUCE THE RISK OF FIRE,

ELECTRIC SHOCK OR PERSONAL INJURY, MOUNT TO

OUTLET BOX OR SUPPORTING SYSTEM ABLE TO

SUPPORT THE WEIGHT OF THE FIXTURE.

OTE: This glass is handcrafted, the slight imperfections in

the glass add to the authenticity of the fixture.

STEP 1:

Secure top loop (I) to fixture body (P). (If applicable).

STEP 2:

Install bottom assembly (R) to cage assembly (F). (If applicable).

Installation And Safety Instructions

Line art shown may not exactly match the fixture enclosed. However, the installation instructions do apply to

this fixture. Fill in Item Number on Carton and File This Sheet For Future Reference. ITEM#_______________

HC-768

51104

Summary of content (2 pages)

PAGE 1
Installation And Safety Instructions HC-768 Line art shown may not exactly match the fixture enclosed. However, the installation instructions do apply to this fixture. Fill in Item Number on Carton and File This Sheet For Future Reference. ITEM#_______________ 051104 GENERAL FOR YOUR SAFETY WARNING: BE SURE THE ELECTRICITY TO THE WIRES YOU ARE WORKING ON IS SHUT OFF. EITHER THE FUSE REMOVED OR THE CIRCUIT BREAKER OFF .
PAGE 2
INSTALLATION HC-768 IMPORTANT: DO NOT ATTACH FIXTURE DIRECTLY TO OUTLET BOX. STEP 1: Secure mounting bar (A) to outlet box with outlet box screws (not supplied). Thread nut (B) on nipple (C) so that 3 threads are exposed above nut (B). Thread nipple (C) into mounting bar (A) and secure with nut (B). Attach screw collar (E) to nipple (C). STEP 2: Using 2 pairs of pliers, open one link of chain (S) and connect it to the fixture loop (I) at the top of the fixture.