Instructions / Assembly

Installation Instructions for

1.0

990C5_20593S-BOW

5720593S, 5920593S

Bowman Closet Light

CAUTION RISK OF FIRE-

This product must be installed in accordance with the applicable

installation code by a person familiar with the construction and

operation of the product and the hazards involved.

Use minimum 90°c supply conductors.

SAVETHESE INSTRUCTIONS!

ENERALG

PRODUCTINFORMATION:

These fixtures are intended to be installed utilizing NEC compliant junction

boxes.

This product is safety listed for damp locations.

This instruction shows a typical installation.

GENERATION LIGHTING

7400 Linder Ave, Skokie, IL 160077

800.969.3347

www.visualcomfort.com

Comfort & Co. logo is a registered trademark of Visual Comfort

& Co. Visual Comfort & Co. reserves the right to change

specifications for product improvements without notification

PAGE 1
Installation Instructions for 990C5_20593S-BOW Bowman Closet Light 5720593S, 5920593S GENERATION LIGHTING 1.0 CAUTION - RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. Use minimum 90°c supply conductors. GENERAL PRODUCT INFORMATION: GENERATION LIGHTING These fixtures are intended to be installed utilizing NEC compliant junction boxes.
PAGE 2
Install the Fixture (Optional) J-Box Installation 1A JUNCTION BOX 7 6 MOUNTING PLATE 1 2 MOUNTING PLATE SCREW 3 TO FIXTURE 8 2 9 FIXTURE BASE 7 6 2 ANCHOR FIXTURE SCREW LED ASSEMBLY 1 (Optional, mounting plate purchased separately):Secure the mounting plate to the junction box. 2 Squeeze the fixture base at each end and in the center to release the clips. Pull the LED assembly up while squeezing the fixture base to separate the LED assembly from the fixture base.