Installation Sheet

2
1A
Secure the mounting plate to the junction box.
(Optional):Determine the position of the fixture and mark the location of the drywall anchors if necessary.
(Optional):Install the anchors If needed.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Mount the fixture base to the ceiling with the provided fixture screws.
Align the LED assembly to the fixture base and snap it into place.
1
2
3
4
5
FIXTURE BASE
Install the Fixture
JUNCTION BOX
MOUNTING PLATE SCREW
MOUNTING PLATE
6
LED ASSEMBLY
1
6
5
FIXTURE SCREW
ANCHOR
7
8
3
7
8